A busy month including not one, but two, high profile exhibition events. The Locker stand was enthusiastically received re-opening doors to existing users and to new clients alike.
Testing of a SFH26 Stainless Steel tube feeder for a high profile project. This SFH26 tube feeder unit was finished in 316 Stainless Steel incorporating BFM fittings for complete isolation of dust. Upon completion of testing the unit exceeded its required throughput by some margin and became an integral component of our working test rig and display piece.
This SFH38 feeder unit was completed in high grade carbon steel, with abrasion resistant liners and finished in our standard high quality paint finish. The electromagnetic feeder was supplied complete with our control panel; giving 0-100% control of available throughput. With an output of up to 215TPH (based on avg. bulk density of 1600kg/m³) this feeder was acquired to duplicate and compliment an existing feeder supplied in 2012.
In addition to a brand new feeder, Morris and Perry Ltd asked us to fully refurbish this SFH36 feeder originally supplied in 1986. The original power unit was fully stripped, inspected and rebuilt with new internals prior to affixing a brand new pan and returning to the customer – for another 30years service.
To complement their existing plant at Kirkby Thore, British Gypsum recently engaged us to produce and install a complete feeder and hopper assembly for them. The SFH46 feeder duplicates an existing Locker unit utilised for the same process and is produced from high grade carbon steel. Both the feeder and the interface are fully lined with 6mm abrasion resistant plates.
Produced for Thrane and Thrane Teknikk A.S., this SFH54 feeder is lined with 6mm abrasion resistant steel liner plates. The ‘V’ profiled pan is designed to help centralise the material flow on applications where unbalanced or uneven material flow can cause knock-on effects further down the process line.
These identical SFH36 electromechanical feeders were produced for Rotex Ltd. Completed to a high standard, inclusive of Stainless Steel fabricated pans, Non-destructive testing of welds and finished in a high build client specific painted finish to the power unit. These feeders were configured to include wrap-around ‘greedy boards’ to interface with existing equipment.
This replacement primary feeder was produced for Hope Construction, Dowlow Quarry. The SFH54 unit was produced to replace the existing feeder with a view to increase the available throughput to in excess of 500tph. Constructed of high quality carbon steel, with our heavy duty SFH54 power unit all finished in our high specification paint finish. The completed feeder was supplied with 6mm grade 304 stainless steel liner plates.
Completed for Rotex Ltd, on behalf of Mitsubishi Heavy Industries, the unit shown is one of two SFH42 units.
This high specification unit required the stainless steel grade 304 fabricated pans to be both dye penetrant inspected and undertake positive material identification (PMI) prior to approval of the finished units. Lined with sacrificial stainless grade 304, the pans were subsequently bead blasted prior to assembly and testing. The heavy duty power unit was finished in a high build client specific paint finish.